05 IFR Procedures

 0    148 Datenblatt    jakubglowala8
mp3 downloaden Drucken spielen überprüfen
 
Frage English Antworten English
What is an Instrument Flight Rules (IFR) flight?
Lernen beginnen
A flight conducted in accordance with the Instrument Flight Rules.
What is an instrument approach procedure (IAP)?
Lernen beginnen
A published series of predetermined manoeuvres providing obstacle protection from the initial approach to landing or missed approach.
What are the main segments of an instrument approach?
Lernen beginnen
Initial, intermediate, final and missed approach.
What is an IAF?
Lernen beginnen
Initial Approach Fix: the fix where the initial approach segment begins.
What is an IF?
Lernen beginnen
Intermediate Fix: the fix associated with the start of the intermediate approach segment.
What is a FAF?
Lernen beginnen
Final Approach Fix: the fix from which the final approach segment of many 2D procedures begins.
What is a FAP?
Lernen beginnen
Final Approach Point: the point where the nominal vertical path of a 3D approach is intercepted.
What is a MAPt?
Lernen beginnen
Missed Approach Point: the point at or before which the prescribed missed approach is initiated when required.
Are FAF and MAPt necessarily at the same location?
Lernen beginnen
No. They define different points within the approach procedure.
What is the purpose of the initial approach segment?
Lernen beginnen
To position the aircraft for the intermediate segment with required obstacle clearance.
What is the purpose of the intermediate approach segment?
Lernen beginnen
To align and configure the aircraft for the final approach.
What is the purpose of the final approach segment?
Lernen beginnen
To provide the path from the FAF/FAP toward landing or the MAPt.
What is the purpose of the missed approach procedure?
Lernen beginnen
To provide obstacle-protected transition from the approach to a safe altitude or holding point.
What is a straight-in approach?
Lernen beginnen
An instrument approach followed by landing on a runway aligned with the final approach course.
What is a circling approach?
Lernen beginnen
An instrument approach followed by visual manoeuvring to a runway not suitable for straight-in landing.
What is a SID?
Lernen beginnen
A published IFR departure route linking a runway or aerodrome to the en-route structure.
What is a STAR?
Lernen beginnen
A published IFR arrival route linking the en-route structure with an approach procedure.
Why are SID and STAR restrictions operationally important?
Lernen beginnen
They provide traffic sequencing, terrain clearance and predictable flight paths.
Does ATC clearance automatically cancel published SID/STAR restrictions?
Lernen beginnen
No. Restrictions remain unless explicitly cancelled, replaced or otherwise specified.
What is an altitude constraint?
Lernen beginnen
A published or cleared altitude that must be met at a specified point.
What does “at or above” mean on an altitude constraint?
Lernen beginnen
The aircraft must cross the fix at no lower than the stated altitude.
What does “at or below” mean?
Lernen beginnen
The aircraft must cross the fix at no higher than the stated altitude.
What does an altitude window mean?
Lernen beginnen
The aircraft must cross between the published upper and lower limits.
What is MSA?
Lernen beginnen
Minimum Sector Altitude: an emergency-use altitude providing at least 1,000 ft obstacle clearance in a defined area.
What radius is normally associated with an MSA?
Lernen beginnen
25 NM from the specified navigation reference, unless otherwise stated.
Does MSA necessarily guarantee navigation signal coverage?
Lernen beginnen
No. Its primary purpose is obstacle clearance.
What is TAA?
Lernen beginnen
Terminal Arrival Altitude: an obstacle-clearance altitude facilitating direct arrival to an RNAV approach.
What is MEA?
Lernen beginnen
Minimum En-route Altitude: the lowest published en-route altitude providing required obstacle clearance and navigation coverage.
What is OCA?
Lernen beginnen
Obstacle Clearance Altitude: the lowest altitude used in establishing compliance with obstacle-clearance criteria.
What is OCH?
Lernen beginnen
Obstacle Clearance Height: OCA expressed as a height above the relevant reference datum.
Is OCA/H itself necessarily the operational minimum used by the crew?
Lernen beginnen
No. Operational DA/H or MDA/H cannot normally be lower than the applicable OCA/H.
What is DA?
Lernen beginnen
Decision Altitude: an altitude at which a missed approach must be initiated if required visual reference is not established.
What is DH?
Lernen beginnen
Decision Height: the corresponding height above the specified reference datum.
What is MDA?
Lernen beginnen
Minimum Descent Altitude: an altitude below which descent is not permitted without required visual reference.
What is MDH?
Lernen beginnen
Minimum Descent Height: MDA expressed as a height above the specified datum.
What is the key operational difference between DA and MDA?
Lernen beginnen
DA is a decision point passed dynamically; MDA is traditionally an altitude not to be descended below.
Under current EASA methodology, what minima are used for a 3D approach?
Lernen beginnen
DA/H.
Under current EASA methodology, what minima are used for a 2D approach flown using CDFA?
Lernen beginnen
DA/H derived from the applicable procedure minima.
What minima are used for a 2D approach not flown using CDFA?
Lernen beginnen
MDA/H.
What is a 2D instrument approach operation?
Lernen beginnen
An approach using lateral navigation guidance only.
What is a 3D instrument approach operation?
Lernen beginnen
An approach using both lateral and vertical navigation guidance.
What is a Type A instrument approach operation?
Lernen beginnen
An instrument approach with DH or MDH at or above 250 ft.
What is a Type B instrument approach operation?
Lernen beginnen
An instrument approach with DH below 250 ft.
How is Type B subdivided under current EASA terminology?
Lernen beginnen
CAT I, CAT II and CAT III.
What defines CAT I in the EASA classification?
Lernen beginnen
DH ≥200 ft and either VIS ≥800 m or RVR ≥550 m.
What defines CAT II in the EASA classification?
Lernen beginnen
100 ft ≤ DH <200 ft and RVR ≥300 m.
What defines CAT III in the current EASA classification?
Lernen beginnen
DH <100 ft or no DH, with RVR <300 m or no RVR limitation.
Does current EASA operational classification still divide CAT III into IIIA, IIIB and IIIC?
Lernen beginnen
No. Current EASA uses CAT III as one category.
What is CDFA?
Lernen beginnen
Continuous Descent Final Approach: a continuous descent technique for flying the final segment of a 2D/NPA procedure.
What is the principal objective of CDFA?
Lernen beginnen
To avoid level flight near minima and provide a stable, constant descent path.
Why is CDFA safer than the traditional dive-and-drive technique?
Lernen beginnen
It reduces level-offs, configuration changes and CFIT risk close to the ground.
Under EASA CAT operations, should NPA procedures normally be flown using CDFA?
Lernen beginnen
Yes, unless another technique has been specifically approved.
From where is CDFA normally initiated?
Lernen beginnen
At or above the FAF altitude/height on the nominal final descent profile.
For a straight-in CDFA, where does the continuous descent concept extend to?
Lernen beginnen
Approximately 50 ft above the threshold or the start of the flare.
Does CDFA change the obstacle-protected design of the published procedure?
Lernen beginnen
No. It is a flight technique applied to the published procedure.
What is a step-down fix?
Lernen beginnen
A fix permitting descent to a lower minimum altitude after it has been positively identified.
Can a step-down altitude be ignored because the FMS shows a smooth vertical path?
Lernen beginnen
No. Published altitude restrictions remain controlling.
What is a stabilised approach?
Lernen beginnen
An approach meeting the operator’s defined criteria for path, speed, configuration, thrust and rate of descent.
Are exact stabilised-approach criteria universal?
Lernen beginnen
No. The operator defines them in the Operations Manual.
What does EASA require generally regarding approach technique?
Lernen beginnen
Approach operations should be flown as stabilised approaches unless specifically approved otherwise.
Why should a high expected rate of descent be briefed?
Lernen beginnen
It increases workload and may threaten stabilised-approach criteria.
What rate of descent does EASA specifically highlight for prior briefing?
Lernen beginnen
More than 1,000 ft/min.
What is the approximate vertical gradient of a 3° glide path?
Lernen beginnen
About 5.2%.
How many feet per NM does a 3° path represent?
Lernen beginnen
Approximately 318 ft/NM; 300 ft/NM is a useful mental approximation.
What is the quick rule for vertical speed on a 3° path?
Lernen beginnen
Groundspeed × 5 gives an approximate rate of descent in ft/min.
At 120 kt GS, what is approximately required for a 3° path?
Lernen beginnen
About 600 ft/min.
At 150 kt GS, what is approximately required for a 3° path?
Lernen beginnen
About 750 ft/min.
At 180 kt GS, what is approximately required for a 3° path?
Lernen beginnen
About 900 ft/min.
What happens to required vertical speed if groundspeed increases?
Lernen beginnen
It increases proportionally for the same flight-path angle.
Why can a strong tailwind make an approach difficult to regain vertically?
Lernen beginnen
High groundspeed gives less time per NM to lose altitude.
What is the 3:1 descent-planning rule?
Lernen beginnen
About 3 NM are required for every 1,000 ft of descent on roughly a 3° path.
Approximately how far is required to lose 3,000 ft on a 3° path?
Lernen beginnen
About 9–10 NM.
What is the difference between descent angle and descent gradient?
Lernen beginnen
Angle is measured in degrees; gradient is vertical distance divided by horizontal distance.
What is a 5.2% gradient approximately in degrees?
Lernen beginnen
About 3°.
What is the standard ICAO missed-approach design climb gradient?
Lernen beginnen
2.5%, unless a higher gradient is published.
If a higher missed-approach gradient is required, where should it be found?
Lernen beginnen
On the published instrument approach chart.
What should a crew confirm when higher missed-approach gradients are published?
Lernen beginnen
That aircraft performance can meet the required gradient under expected conditions.
When does obstacle protection for the published missed approach assume the turn begins?
Lernen beginnen
Not before the published turning point or applicable procedure point.
Why can an early turn during a missed approach be hazardous?
Lernen beginnen
It may take the aircraft outside the protected obstacle-clearance area.
When should the missed approach be flown?
Lernen beginnen
Whenever required visual reference is not obtained, the approach becomes unstable, or continuation is unsafe.
If visual reference is lost after descending below minima, what is required?
Lernen beginnen
A prompt go-around.
Does initiating a go-around mean immediately turning toward the next missed-approach fix?
Lernen beginnen
Not necessarily; first follow the published missed-approach track and turn constraints.
Why must the missed approach be briefed before commencing the approach?
Lernen beginnen
It is a high-workload manoeuvre that may be required with little warning.
What is an approach ban?
Lernen beginnen
A restriction on continuing an approach when reported visibility or controlling RVR is below the applicable minimum.
Under EASA CAT rules, does reported RVR/VIS below minima itself prohibit beginning the approach?
Lernen beginnen
No. The regulatory restriction concerns continuation beyond the specified point.
If controlling RVR/VIS is below minima, below what point may an EASA CAT approach not normally continue?
Lernen beginnen
Past 1,000 ft above aerodrome elevation.
What applies when DH or MDH is above 1,000 ft above aerodrome elevation?
Lernen beginnen
The approach may not continue into the final approach segment when RVR/VIS is below minima.
What if RVR/VIS deteriorates below minima after passing the approach-ban point?
Lernen beginnen
The approach may continue to DA/H or MDA/H, subject to the applicable rules.
What is normally the controlling RVR for an aeroplane approach?
Lernen beginnen
Touchdown-zone RVR.
If touchdown-zone RVR is not reported, what may become controlling under EASA AMC?
Lernen beginnen
Midpoint RVR.
What must exist at DA/H to continue below it when visual reference is required?
Lernen beginnen
The required visual reference for the intended operation and runway.
Must required visual reference merely appear momentarily at minima?
Lernen beginnen
No. It must be established and maintained for continued landing.
What is the basic decision at DA/H?
Lernen beginnen
If required visual reference is not established, execute the missed approach.
Can the aircraft physically descend slightly below DA during a go-around initiated at DA?
Lernen beginnen
Yes. DA is a decision point; aircraft inertia means some altitude loss may occur during transition.
Why is an MDA concept different from DA?
Lernen beginnen
MDA is a hard altitude floor in non-CDFA operation and must not be descended below without visual reference.
What is circling?
Lernen beginnen
A visual manoeuvre after an instrument approach to position for landing on a different or insufficiently aligned runway.
Is circling an instrument or visual manoeuvre?
Lernen beginnen
The circling phase is visual, although it follows an instrument approach.
What must be maintained during circling?
Lernen beginnen
Required visual reference with the runway environment while remaining within the protected area.
What should be done if visual reference is lost during circling?
Lernen beginnen
Execute the prescribed circling missed-approach procedure.
Why are circling minima normally higher than straight-in minima?
Lernen beginnen
Additional obstacle clearance is required during visual manoeuvring around the aerodrome.
What determines the applicable circling aircraft category?
Lernen beginnen
Aircraft approach speed category and the speed actually required for the manoeuvre.
What is category A by VAT?
Lernen beginnen
Less than 91 kt.
What is category B by VAT?
Lernen beginnen
91–120 kt.
What is category C by VAT?
Lernen beginnen
121–140 kt.
What is category D by VAT?
Lernen beginnen
141–165 kt.
What is category E by VAT?
Lernen beginnen
166–210 kt.
If circling speed exceeds the limit of the normal aircraft category, what should be considered?
Lernen beginnen
Use of the minima/protection for the appropriate higher category.
Why does circling speed affect protected-area size?
Lernen beginnen
Higher speed produces a larger turn radius.
What is a holding pattern?
Lernen beginnen
A predetermined manoeuvre keeping an aircraft within specified airspace while awaiting further clearance.
What are the two basic legs of a conventional hold?
Lernen beginnen
Inbound and outbound legs connected by 180° turns.
What is a standard holding pattern?
Lernen beginnen
A hold with right turns unless otherwise published or instructed.
What is a non-standard holding pattern?
Lernen beginnen
A hold with left turns.
What are the three conventional holding entries?
Lernen beginnen
Direct, parallel and offset/teardrop.
Are holding-entry sectors absolute manoeuvring requirements?
Lernen beginnen
They are recommended entry methods; safe containment and operator procedures remain controlling.
What is the purpose of wind correction in a hold?
Lernen beginnen
To maintain the protected holding pattern and correct inbound track.
On which leg is holding timing primarily adjusted?
Lernen beginnen
The outbound leg, to achieve the required inbound timing.
What is the usual inbound holding time at or below FL140?
Lernen beginnen
1 minute unless otherwise published.
What is the usual inbound holding time above FL140?
Lernen beginnen
1.5 minutes unless otherwise published.
If a hold is defined by DME distances, what controls the outbound limit?
Lernen beginnen
The published DME distance rather than timing.
What must always take priority over generic holding-speed memory values?
Lernen beginnen
The speed published on the chart, ATC restriction and applicable aircraft/operator limits.
Why is holding at high TAS operationally important?
Lernen beginnen
Higher TAS increases turn radius and the airspace required.
What happens to turn radius in a hold as TAS increases?
Lernen beginnen
It increases.
Why may bank or turn-rate limits matter in holding?
Lernen beginnen
They determine whether the aircraft remains within expected protected geometry.
What is the protected side of a hold?
Lernen beginnen
The side containing the holding pattern and the main obstacle-protected area.
Why should an aircraft avoid unnecessary excursions onto the non-holding side?
Lernen beginnen
Obstacle-protection margins are smaller there.
What is procedure turn or course reversal designed to achieve?
Lernen beginnen
To reverse direction and establish the aircraft inbound on the final/intermediate approach course.
Can every published approach use any course-reversal technique?
Lernen beginnen
No. The chart and procedure coding define the authorised manoeuvre.
What is a racetrack procedure?
Lernen beginnen
A course-reversal procedure resembling a holding pattern used to establish the aircraft inbound.
What is a base turn procedure?
Lernen beginnen
A specified outbound track followed by a turn to intercept the inbound track.
What does “NoPT” or equivalent procedure indication mean conceptually?
Lernen beginnen
A procedure turn or course reversal is not required from that arrival route.
Why should pilots not improvise course reversals?
Lernen beginnen
Obstacle protection assumes the published procedure geometry.
What is an ATC radar vector to final intended to achieve?
Lernen beginnen
Position the aircraft to intercept the final approach course safely.
Does an ATC vector remove the crew’s responsibility for altitude awareness?
Lernen beginnen
No.
Why should minimum cleared altitude and terrain be continuously monitored under vectors?
Lernen beginnen
Vectoring does not remove CFIT risk.
What is the purpose of an approach briefing?
Lernen beginnen
To build a shared mental model of the approach, threats, minima and missed approach.
What are essential elements of an approach briefing?
Lernen beginnen
Procedure, runway, minima, navigation setup, key constraints, threats and missed approach.
Why should the missed approach altitude be checked carefully?
Lernen beginnen
A wrongly set altitude can create an immediate vertical-path or ATC conflict during go-around.
Why should approach minima be independently cross-checked?
Lernen beginnen
Minima errors can directly compromise terrain clearance and landing legality.
Why should final approach course and runway heading be compared?
Lernen beginnen
A significant difference may indicate an offset approach or wrong procedure/runway selection.
Why should approach navigation sources be identified before final approach?
Lernen beginnen
Correct source selection and monitoring are essential for valid guidance.
What is the operational significance of a published minimum temperature on an LNAV/VNAV approach?
Lernen beginnen
Baro-VNAV vertical guidance may not be authorised below it without approved compensation.
Can an advisory FMS vertical path convert an LNAV approach into a 3D approach?
Lernen beginnen
No. The published approach type and approved guidance determine the operation.
Does a synthetic or advisory glide path change published LNAV minima?
Lernen beginnen
No.
Why must published altitude constraints still be respected when using VNAV?
Lernen beginnen
VNAV guidance does not supersede procedure obstacle-clearance restrictions.
What is the main threat of descending early below a published segment altitude?
Lernen beginnen
Loss of guaranteed obstacle clearance.
What is the main threat of remaining high until very late in the approach?
Lernen beginnen
An unstable approach requiring excessive descent rate or configuration changes.
What is the preferred response to an approach that cannot be stabilised?
Lernen beginnen
Go around rather than attempt to salvage it close to the ground.
What is the fundamental purpose of IFR procedural discipline?
Lernen beginnen
To keep the aircraft inside the obstacle-protected and traffic-managed flight path.

Sie müssen eingeloggt sein, um einen Kommentar zu schreiben.